How to install a stainless steel industrial sink?

Table of Contents

Introduction to stainless steel industrial sink

The stainless steel industrial sink is essential equipment in any business that requires constant cleaning and disinfection, especially in the food and restaurant sector. This type of sink is characterized by its durability, resistance to corrosion and ease of cleaning, which makes it ideal for intensive and continuous use in commercial and industrial environments. In this article, we will teach you how to install an industrial stainless steel sink in your business easily and effectively.

Before we begin, we would like you to keep in mind that in Perez Precision Works, we offer you industrial sinks High quality stainless steel, designed to withstand intensive and continuous use in commercial and industrial environments.

Talk to a adviser now to learn more about our products and services and equip your business with the best sinks on the market!

How to install a sink: Preparations for installation

Before going fully into the question of how to install a stainless steel industrial sink, it is important that you make sure you have everything you need to carry out the process effectively. Here is a checklist of the materials and tools you will need:

  • Industrial stainless steel sink
  • water pipe and drain
  • Measuring tape
  • Wrench
  • Screwdriver
  • Drill
  • drill bit for metal
  • pipe sealant
  • Level

Be sure to review the manufacturer's installation instructions to confirm that you have all the necessary parts and tools. Once you have everything you need, you can start installing your industrial stainless steel sink. Read on to learn how!

How to install a sink: Selection of the right place 

It is extremely important that you select the right place where you will place the sink in question. You must make sure that the selected place has access to the water and drainage pipes necessary for its operation.

Also, it is important that you select a location with enough space around the sink to allow for easy cleaning and maintenance. You should also make sure that the selected place is level to avoid stability and drainage problems.

Keep in mind that the stainless steel industrial sink is resistant and durable, but it is important that you protect it from damage and blows that could damage its structure and finish.

Once you have selected the right place for your industrial stainless steel sink, you can embark on solving the question of how to install a sink.
Let's continue!

How to install a sink: plumbing requirements

Before installing your stainless steel industrial sink, it is important that you take into account the plumbing requirements necessary for its correct operation. You will need to ensure that the selected location has access to the necessary water and drainage pipes.

It is important that the water supply is properly connected and that the drain is installed correctly to avoid clogging and leaking problems. You will need to make sure that the water supply pipe is connected to the sink faucet and that the drain pipe is connected to the drain.

How to install a sink: Electric connection

In general, most stainless steel industrial sinks must be connected to a dedicated 120 volt circuit. There must be a proper ground connection and a current disconnect circuit breaker for safety. Be sure to follow the manufacturer's instructions for the specific electrical wiring of the industrial sink you are installing.

It is important to use electrical wire that meets the proper gauge requirements. Using a cord that is too small for the electrical load of the industrial sink may cause a fire hazard or circuit failure.

If you don't feel comfortable making the electrical connection to your industrial sink, call a professional electrician for help. Incorrect electrical installation can cause damage to the equipment and endanger the safety of people in the area.

Always remember to follow the safety regulations and the manufacturer's instructions for the electrical connection of the stainless steel industrial sink.

Do you need an industrial stainless steel sink for your business?

At Perez Precision Works we have the perfect solution for you. Contact us now and discover how our products can improve the cleaning and disinfection of your business.


kitchen sink

How to install a sink: Installation of supports 

Before installing the industrial stainless steel sink, you must make sure that it is well supported, for this we recommend that you keep in mind the following steps.

  1. Begin by locating the wall brackets: Locate the wall brackets according to the manufacturer's instructions and mark the mounting hole locations on the wall.
  2. Drill holes in the wall: Drill holes in the wall at the locations you have marked.
  3. Install the brackets: Place the wall brackets over the drilled holes and secure to the wall with the provided screws and wall anchors.
  4. Assemble the sink brackets: Assemble the sink brackets to the bottom of the sink per the manufacturer's instructions.
  5. Attach sink brackets to wall brackets: Place the sink brackets on the wall brackets and make sure they are level. Then, attach the sink brackets to the wall brackets with the provided screws.
  6. Check stability: Verify that the sink is level and stable before proceeding with the installation.
  7. Continue with the installation: Follow the manufacturer's instructions for connecting plumbing and electrical to the stainless steel industrial sink.

Remember that it is important to follow the manufacturer's instructions to ensure a safe and successful installation of your stainless steel industrial sink.

Installation of the industrial stainless steel sink

In this section, we finally have all the preparations to discover how to install a stainless steel industrial sink. Below we will explain step by step how to carry out the process correctly:

  • Place the sink on the supports and make sure it is level.
  • Connect the hot and cold water pipes to the sink faucet.
  • Connect the sink drain to the appropriate drain tube.
  • Check that all connections are tight and there are no leaks.
  • Connect power to the water heater (if your sink has this feature).

Remember that the manufacturer's instructions on how to install a sink can be of great help and reference throughout the process.

How to Install a Sink: Testing and Adjusting the Sink

Once the stainless steel industrial sink has been installed, it is important to perform tests and adjustments to ensure that it is working properly.

First, all plumbing and electrical connections should be checked to make sure there are no leaks or shorts. The sink should then be filled with water and allowed to run for several minutes to ensure adequate water flow and no drainage issues.

It is also important to check that the hot water supply system is working properly. If the industrial sink has a hot water function, you must ensure that the water temperature is within the desired range and that there are no pressure problems.

If any problems are found during testing, it is important to make any necessary adjustments before you start using the sink on a regular basis. This may include adjusting water control valves or replacing faulty parts.

Proper testing and adjustment can help prevent problems and ensure that your stainless steel industrial sink performs optimally throughout its life.

Where to get a quality industrial sink?

If you're looking for the best place to buy a high-quality industrial sink, look no further than Perez Precision Works! Our company specialized in stainless steel elements offers a wide variety of industrial sinks top quality that adapt to your needs.

Whether you're looking for a sink for your restaurant, hotel, or other food service business, we've got you covered.

Access the following link to see our selection and place your order today. You will not regret choosing Perez Precision Works for your industrial sink needs!

×